Use of the attainable region method to investigate the breakage behavior of a bed of silica particles

N. Hlabangana; G. Danha; D. Hildebrandt; D. Glasser; S. Wabula

Use of the attainable region method to investigate the breakage behavior of a bed of silica particles

N. Hlabangana
, G. Danha
, D. Hildebrandt
, D. Glasser
, S. Wabula

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

Impact tests on single particles or a bed of particles are used to determine the fracture characteristics of particles. Many different techniques have been adopted in comminution in order to find ways of optimizing energy consumption in the size reduction process. In this paper, we apply one such method called the Attainable Region (AR) analysis technique to optimize the impact energy on a bed of silica particles. The attainable region is a fundamental approach that is equipment-independent and can be used to analyze breakage processes. The AR is defined as a set of all possible outcomes, for the system under consideration that can be achieved using fundamental processes operating within the system.

Original language	English
Title of host publication	IMPC 2016 - 28th International Mineral Processing Congress
Publisher	Canadian Institute of Mining, Metallurgy and Petroleum
ISBN (Electronic)	9781926872292
Publication status	Published - 2016
Externally published	Yes
Event	28th International Mineral Processing Congress, IMPC 2016 - Quebec City, Canada Duration: Sept 11 2016 → Sept 15 2016

Publication series

Name	IMPC 2016 - 28th International Mineral Processing Congress
Volume	2016-September

Conference

Conference	28th International Mineral Processing Congress, IMPC 2016
Country/Territory	Canada
City	Quebec City
Period	9/11/16 → 9/15/16

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

All Science Journal Classification (ASJC) codes

Geochemistry and Petrology
Geotechnical Engineering and Engineering Geology
Mechanical Engineering
Earth-Surface Processes

Cite this

Hlabangana, N., Danha, G., Hildebrandt, D., Glasser, D., & Wabula, S. (2016). Use of the attainable region method to investigate the breakage behavior of a bed of silica particles. In IMPC 2016 - 28th International Mineral Processing Congress (IMPC 2016 - 28th International Mineral Processing Congress; Vol. 2016-September). Canadian Institute of Mining, Metallurgy and Petroleum.

@inproceedings{2ab845c9c50f411b923542bc5bdacf57,

title = "Use of the attainable region method to investigate the breakage behavior of a bed of silica particles",

abstract = "Impact tests on single particles or a bed of particles are used to determine the fracture characteristics of particles. Many different techniques have been adopted in comminution in order to find ways of optimizing energy consumption in the size reduction process. In this paper, we apply one such method called the Attainable Region (AR) analysis technique to optimize the impact energy on a bed of silica particles. The attainable region is a fundamental approach that is equipment-independent and can be used to analyze breakage processes. The AR is defined as a set of all possible outcomes, for the system under consideration that can be achieved using fundamental processes operating within the system.",

author = "N. Hlabangana and G. Danha and D. Hildebrandt and D. Glasser and S. Wabula",

year = "2016",

language = "English",

series = "IMPC 2016 - 28th International Mineral Processing Congress",

publisher = "Canadian Institute of Mining, Metallurgy and Petroleum",

booktitle = "IMPC 2016 - 28th International Mineral Processing Congress",

address = "Canada",

}

Hlabangana, N, Danha, G, Hildebrandt, D, Glasser, D & Wabula, S 2016, Use of the attainable region method to investigate the breakage behavior of a bed of silica particles. in IMPC 2016 - 28th International Mineral Processing Congress. IMPC 2016 - 28th International Mineral Processing Congress, vol. 2016-September, Canadian Institute of Mining, Metallurgy and Petroleum, 28th International Mineral Processing Congress, IMPC 2016, Quebec City, Canada, 9/11/16.

Use of the attainable region method to investigate the breakage behavior of a bed of silica particles. / Hlabangana, N.; Danha, G.; Hildebrandt, D. et al.
IMPC 2016 - 28th International Mineral Processing Congress. Canadian Institute of Mining, Metallurgy and Petroleum, 2016. (IMPC 2016 - 28th International Mineral Processing Congress; Vol. 2016-September).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Use of the attainable region method to investigate the breakage behavior of a bed of silica particles

AU - Hlabangana, N.

AU - Danha, G.

AU - Hildebrandt, D.

AU - Glasser, D.

AU - Wabula, S.

PY - 2016

Y1 - 2016

N2 - Impact tests on single particles or a bed of particles are used to determine the fracture characteristics of particles. Many different techniques have been adopted in comminution in order to find ways of optimizing energy consumption in the size reduction process. In this paper, we apply one such method called the Attainable Region (AR) analysis technique to optimize the impact energy on a bed of silica particles. The attainable region is a fundamental approach that is equipment-independent and can be used to analyze breakage processes. The AR is defined as a set of all possible outcomes, for the system under consideration that can be achieved using fundamental processes operating within the system.

AB - Impact tests on single particles or a bed of particles are used to determine the fracture characteristics of particles. Many different techniques have been adopted in comminution in order to find ways of optimizing energy consumption in the size reduction process. In this paper, we apply one such method called the Attainable Region (AR) analysis technique to optimize the impact energy on a bed of silica particles. The attainable region is a fundamental approach that is equipment-independent and can be used to analyze breakage processes. The AR is defined as a set of all possible outcomes, for the system under consideration that can be achieved using fundamental processes operating within the system.

UR - https://www.scopus.com/pages/publications/85048320859

UR - https://www.scopus.com/pages/publications/85048320859#tab=citedBy

M3 - Conference contribution

AN - SCOPUS:85048320859

T3 - IMPC 2016 - 28th International Mineral Processing Congress

BT - IMPC 2016 - 28th International Mineral Processing Congress

PB - Canadian Institute of Mining, Metallurgy and Petroleum

T2 - 28th International Mineral Processing Congress, IMPC 2016

Y2 - 11 September 2016 through 15 September 2016

ER -

Use of the attainable region method to investigate the breakage behavior of a bed of silica particles

Abstract

Publication series

Conference

UN SDGs

All Science Journal Classification (ASJC) codes

Other files and links

Fingerprint

Cite this